12
Limited 1 Year Warranty
Current Audio, LLC amplifiers are warranted to be free from defects in materials and or workmanship to the
original retail purchaser for a period of 1 year, provided the equipment was purchased and installed from a
Current Audio, LLC Authorized Dealer or Distributor.
In the event of defective materials and or workmanship, Current Audio, LLC repair or replace, at its option,
the defective product at no charge to the purchaser. In order to make claim under this Warranty and to
obtain performance of any obligation under warranty, please contact Current Audio or your Authorized
Distributor. Instructions will be given on how to return the defective product to Current Audio. Returned
products must be shipped prepaid. Proof of purchase must be provided with the product.
The Warranty does not apply to damage not resulting from defective materials and or workmanship while in
the possession of the original consumer or due to unreasonable use by the original owner, which includes but
not limited to improper installation, negligence, unauthorized repair or modification, or aesthetic
deterioration from the environment. Products purchased by internet or unauthorized sources will void the
warranty and not be honored.
Current Audio, LLC is not liable for any incidental or consequential damages, so the above limitations or
inclusion may not apply to you. This warranty gives you specific legal rights, and you may have other rights,
which vary from state to state within the United States.
Warranty
www.currentaudio.com
©2011 Current Audio LLC
1830 John Towers Avenue El Cajon, CA 92020 Sales 866-927-7181
AMP1270 RPA 11112011
Considerations:
• Global level setting-start with Global level at zero CCW. Set each zone that is set to Global In to max CW. With a
working known source connected slowly increase the Global Level to the maximum safe listening level. When the
amp is energized it will not blast the speakers or damage any equipment including your ears.
• Using a Volume Control-set volume control to maximum then adjust that zone Level on amp for maximum
listening pleasure. This will prevent extra loud volumes on energizing the amp or a particular zone.
• Adding Zones-If more zones or rooms of music are required you can add an extra amplifier. Use the unity gain Loop
Out to connect to the input of the added amp.
• Blended Stereo-To obtain both Left and Right blended stereo into one speaker use the Bridge technique on one
zone. Both Left and Right Preamp channels must be connected.
• Bridged Stereo-To obtain Stereo from two separate zones, jumper both inputs on one zone with the Left and on
the other zone jumper both inputs with the Right. This will provide a true stereo high powered zone.
• 12VDC Trigger-When using the Trigger jack to control On/Off, wire the tip of the male plug for (+) 12VDC. When
12VDC is present at the Trigger the amp will energize. The front Power Button must be in standby (RED).
• Surge Protection-To protect the amp from power surges and lightening strikes install the ILS120 in-line surge
protector. This will protect the amp from power surges, over and under voltage from power company and lightening.
The ILS120 can be used on TV, subwoofer, computer, projector or any equipment with an IEC plug.
(16 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals